The Radius T Feed Connector is used to create a T pattern with Radius track. Available in Matte White or Matte Black finish. Power may be fed into the connector using a standard 3/8 inch trade size electrical fitting or from a 4 inch octagon outlet box using a Junction Box Cover (9060). The connector is not polarized and not pre-wired. Four 12 gauge jumper wires are included to make all necessary connections. Each leg of the connector has two screw terminals for connecting the wires. The legs may be un-wired and used as a dead end. Do not use the T connector as a conduit support. A separate support for the conduit must be used.