IT4000M 3 Inch 20-35W Non-IC Remodel Housing
3 inch low voltage non-IC remodel housing is equipped with thermal protection and is suitable for damp locations. Cannot be used in contact with insulation and should be at least 3 inches from insulation . Magnetic 120 volt to 12 volt transformer included. Takes up to .9 inch thick ceiling. 3.25 inch ceiling cut out. For use with 20 watt 12 volt MR16 trims S4151, S4450, T4145, T4450, T4650. For use with 35 watt 12 volt MR16 trims T4000, T4125, T4200, T4200V, T4210V, T4300. 13 inches long x 4.25 inches wide x 4.5 inches high. Suitable for damp location. UL listed.
|Dimensions: 13"L x 4.5"H x 4.25"W|
|Lamp Source: Halogen|
1 x MR16/GU5.3 (bipin)/12V Halogen
Bulb not included
1 x MR16/GU5.3 (bipin)/12V LED
UL, Damp Location